Polaris RANGER 1000 2020 Service Manual page 341

q
3. Locate the shift cable through the right rear wheel
well area.
q
4. Inspect shift cable , dust boot
e
pivot bushings , and mount
wear or damage. Replace if wear or damage is found.
t
5. Loosen the lower jam nut
the mount bracket to move the upper jam nut
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
6. With the cable removed from the bracket, turn the
w
, clevis pin and
r
. Verify there is no
and pull the cable out of
y
.
7. Reinstall the cable in the bracket.
y
upper jam nut to adjust the cable. Moving the
y
upper jam nut closer to the shift cable boot creates
a larger gap in high. Moving the upper jam nut
away from the shift cable boot creates a larger gap in
park.
NOTICE
1 full turn of the adjustment nut
1 mm of dash gap.
CLOSER TO DASH IN HIGH GEAR
CLOSER TO DASH IN PARK
TRANSMISSION
y
y
equals approximately
7
7.5