Shift Cable Service - Polaris RANGER 1000 2020 Service Manual

SHIFT CABLE SERVICE

REMOVAL
1. Remove the upper dash panel.
2. Remove the two push rivets
trim panel.
3. Rotate the center trim panel upwards, disconnect the
electrical connectors and release from the upper
retaining tabs. Remove from the vehicle.
4. Remove the 10mm fastener
r
and T40 Torx fastener securing the left dash
bracket.
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
5. Rotate the left dash bracket
q
from the center dash
6. Remove the 10mm nut
7. Loosen the locknut
w e
, two push rivets ,
8. Remove the propshaft tunnel cover. Refer to Floor
t
and remove from the vehicle.
y
from the shift cable
remove the cable from the shift lever.
i
behind the dash, and remove
the shift lever from the retaining bracket
Panel Service page 11.63.
TRANSMISSION
to the left as shown
u
, and
7
7.9