Prop Shaft Service - Polaris RANGER 1000 2020 Service Manual

PROP SHAFT SERVICE

PROP SHAFT SERVICE
REMOVAL
1. Remove the front bumper. Refer to Front Bumper
Service page 11.31
2. Remove the front gearcase. Refer to Front Gearcase
Removal.
3. Carefully guide the prop shaft out from the right front
of the vehicle.
NOTICE
If there is insufficient clearance to remove the
propshaft, loosen the steering rack nuts and allow the
steering rack to shift for more clearance. Refer to
Steering Rack Removal page 9.8.
INSTALLATION
1. Carefully guide the propshaft through the right front of
the vehicle and align with the transmission input
shaft.
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
2. Slide the propshaft back all the way back on the
transmission input shaft.
3. Install the front gearcase. Refer to Front Gearcase
Installation page 8.26.
FINAL DRIVE
8
8.11