Using Markers - Keysight Technologies CX3300 Series User Manual

Using the CX3300
Making a Measurement and Using Useful Tools

Using Markers

The CX3300 supports the following markers.
•
•
•
Marker can be activated from the Display tool palette. To display a maker, drag
and drop a marker icon on a waveform.
The Display tool palette provides the following icons used for displaying markers
and annotations and for changing the plot appearance.
Markers
Annotations
Persistence
Plot
Axis
Waveform
Memories
64
Cross hair marker
Reads X and Y measurement data (X, Y) on a waveform and displays the values
X and Y in the Marker data view below the Main Waveform. If the marker mode
is set to Manual (this is as same as removing the check from Track on the
context menu opened by right-clicking on the marker), the marker reads X and
Y values of the specified point on the graph.
A-B marker
Reads X and Y measurement data (X1, Y1) and (X2, Y2) on a waveform and
displays the values X1, X2, Y1, Y2, X2-X1, Y2-Y1, and 1/(X2-X1) in the Marker
data view. If the marker mode is set to Manual, the A-B marker reads X and Y
values of the specified points on the graph.
Area marker
Obtains the integration value and the average value of the data within the
specified area on a waveform and displays the Area data view below the Main
Waveform.
The Area data view shows Area (integration value), Average, Max, Min, P-P
(peak-to-peak), RMS (root mean square), Count, Start (area minimum time),
Stop (area maximum time), and Baseline (integration baseline).
Cross, A-B, Area, Area (width), Area (width), Area (Period),
and OFF
Display and Waveform
Normal, Infinity, 10 s, etc.
Auto, Dots, Lines, Area, Gradation, and Diamonds
Auto, Linear, Log, Invert, X1 and Y1, Show All, etc.
Memory 1 to Memory 8
Keysight CX3300 User's Guide, Edition 5