Instrument Maintenance - Teledyne 100E Instruction Manual

Model 100E Instruction Manual

9. INSTRUMENT MAINTENANCE

Predictive diagnostic functions including data acquisition, failure warnings and alarms
built into the analyzer allow the user to determine when repairs are necessary without
performing unnecessary, preventative maintenance procedures. There is, however, a
minimal number of simple procedures that, when performed regularly, will ensure that
the analyzer continues to operate accurately and reliably over its lifetime. Repair and
troubleshooting procedures are covered in Chapter 9 and Chapter 11 of this manual.
A span and zero calibration check must be performed following some of the
maintenance procedures listed below. Refer to Chapter 7.
Risk of electrical shock. Disconnect power before performing any
operations that require entry into the interior of the analyzer.
The operations outlined in this chapter must be performed by
qualified maintenance personnel only.
The front panel of the analyzer is hinged at the bottom and may be opened
to gain access to various components mounted on the panel itself or located
near the front of the instrument (such as the particulate filter).
Two fasteners located in the upper right and left corners of the panel lock it
045150102 Rev XB1
NOTE
CAUTION
NOTE
NOTE
shut (Figure 3-9).
Instrument Maintenance
155