Maintenance Schedule; Table 9-1: M100E Preventive Maintenance Schedule - Teledyne 100E Instruction Manual

Instrument Maintenance

9.1. Maintenance Schedule

Table 9-1 is the recommended maintenance schedule for the M100E. Please note that in
certain environments with high levels of dust, humidity or pollutant levels some
maintenance procedures may need to be performed more often than shown.

Table 9-1: M100E Preventive Maintenance Schedule

Item Action
TEST Review and
functions evaluate
Evaluate
Zero/span
offset and
check
slope
Zero and
Zero/span
span
calibration
calibration
PMT Sensor Low-level
Hardware hardware
Calibration calibration
Change
Particulate
particle
filter
filter
Check for
Pneumatic leaks in
sub-system gas flow
paths
Sample
Chamber
Clean
windows and
Filters
External zero
Exchange
air scrubber
chemical
(optional)
156
Frequency Cal
Check ?
Weekly No
Weekly Yes
Every 3
Yes
months
On PMT or
preamp Yes
changes
Weekly No
Annually or
Yes on
after repairs
leaks, else
involving
no
pneumatics
As necessary Yes
Every 3
No
months
Model 100E Instruction Manual
Manual
Section
Appendix
C
7.3, 7.6
7.2, 7.4,
7.5
11.6.3
9.3.1
11.5.1;
11.5.2
- -
9.3.3
Date Performed
045150102 Rev XB1