Initial Operation; Figure 3-8: M100E Layout (Basic Unit - No Valve Options) - Teledyne 100E Instruction Manual

Model 100E Instruction Manual

3.2. Initial Operation

If you are unfamiliar with the M100E theory of operation, we recommend that you read
Section 10 before proceeding.
For information on navigating the analyzer's software menus, see the menu trees
described in Appendix A.1.
ON/OFF
SWITCH
Pump Assy
Sensor
Housing
Relay Board
PS2
(+12 VDC)
PS1
(+5 VDC; ±15VDC)
Power
Receptacle
Figure 3-8:
045150102 Rev XB1
Do not look at the UV lamp while the unit is operating.
UV light can case eye damage.
(plastic glasses will not do).
Front Panel
Vacuum
Manifold
M100E Layout (Basic Unit – No Valve Options)
CAUTION
Always use safety glasses
UV Source Lap
Mother
Board
Getting Started
Particulate Filter
Hydrocarbon Scrubber
(Kicker)
Hidden from view
PMT Housing
PMT Preamp PCA
PMT Cooling System
PC/104 Card
Rear Panel
35