Ignition System Repair Procedures - TOHATSU 40 Service Manual

IGNITION SYSTEM REPAIR
PROCEDURES
1 2
Disable ignition system, by disconnecting exciter
coil terminals (4), (5), (6), (7), [(8) and (9) for
models 60B and 70B only] to prevent accidental
engine startup during removal and replacement
of the flywheel.
Flywheel is under high torque and requires the
use of special tools for removal and installation.
Failure to use the specified tools can result in
injury or damage to the flywheel or coil plate
electrical components.
3-/ 4-Cylinder
WARNING
CAUTION
ELECTRICAL SYSTEM
T1479
7-59