TOHATSU 40 Service Manual page 278

4. For models 40 /50 / 60 / 70: Retract brushes
49 50 51
as you slide motor base (1) over commutator
(2). Align notch (3) in motor base with tab (4) in motor body (5) and
seat motor base to motor body.
For models 80 / 90 / 115 / 120 / 140: Retract brushes (1) as
52
you slide brush assembly (2) over commutator (3).
5. For models 80 / 90 / 115 / 120 / 140 ONLY: Align tab (1) in
53
motor base with notch (2) in motor body and seat motor
base to motor body.
6. For models 80 / 90 / 115 / 120 / 140 ONLY: Apply
53
threadlocker to brush assembly screw threads. Align
clearance holes for brush assembly screws in motor base with
screw holes in brush assembly and secure with screws (3).
3-/ 4-Cylinder
T1533
ELECTRICAL SYSTEM
T1536 T1537
T1539
T1540
7-99