TOHATSU 40 Service Manual page 315

SECTION 8
Disassembly and Assembly
DO NOT disassemble any component until all
system pressure has been released and the oil
reservoir has been drained. Depressurize the PT/
T unit as described in General Precautions at the
beginning of this section.
Significant residual pressure can exist behind
components when removed. Always cover each
part with a shop rag when removing it.
Disassemble and assemble the PT/T internal components in
accordance with the previous system diagrams and the component
guidelines contained in this section.
Reference the following specification table for Disassembly
9
and Assembly special tool requirements.
Tool
Tilt Rod Guide Wrench
Tilt Rod Guide Wrench
Trim Rod Guide Wrench
Power Trim/Tilt
Test Stand
8-16
WARNING
WARNING
Part Number
1 3C8-72791-0
1 3B7-72791-0
2 3B7-72792-0
3 3B7-72794-0
T1330
Applicability
40 / 50
Old Style and New
Style PT/T
Old Style and New
Style PT/T
Old Style PT/T
3-/ 4-Cylinder