SECTION 7
The force needed to loosen and tighten the
flywheel nut requires flywheel be removed and
installed with engine mounted and secured on an
engine stand.
Use proper precautions when performing tests
with the engine cover removed. Do not wear
loose clothing or jewelry. Keep hair, hands, and
clothing away from the flywheel and other
moving parts.
When repairs are complete, make sure all ignition
and electrical leads are properly routed and
clamped in their original positions and the start-
ingear prevention system must be tested before
returning engine to customer.
7-60
CAUTION
CAUTION
CAUTION
T1480
3-/ 4-Cylinder