Installation
Install in reverse order of removal.
Disconnect negative battery cable from battery
before installing coil plate assembly.
Use threadlocker on screw threads before installing
screws.
Apply light coat of low temperature lithium grease to
the upper main bearing outer and guide plate.
Ignition Coil
Disconnect negative battery cable from battery
before removing ignition coil.
Removal
1. Disconnect CD Unit output lead (1) from ignition coil
24
primary cable (2).
2. Disconnect spark plug cap (1) from spark plug (2).
25
3. Remove bolts (1) and remove ignition coil.
26
3-/ 4-Cylinder
NOTE
NOTE
ELECTRICAL SYSTEM
T1506
T1507
T1508
7-71