SECTION 4
Exhaust Cover
15. Lightly coat both sides of new inner and outer exhaust
51
cover gaskets with gasket sealant. Install gaskets and
mount exhaust covers to cylinder block. Torque exhaust cover
bolts to specification from lowest embossed number to highest.
Final Assembly
16. Install the reed valves and intake manifold. See Intake Manifold
in Section 3.
17. Install new recirculation lines from the cylinder block to
52
the crankcase and from the crankcase to intake manifold
(23) as applicable.
Install check valve (24) so flap is bent toward the
53
cylinder block. Install new gaskets (25) and (26) dry.
4-38
NOTE
T1249
T1251
T1250
3-/ 4-Cylinder