TOHATSU 40 Service Manual page 96

SECTION 4
Installation
Ignition system must be disabled to prevent
accidental engine startup during installation of
the flywheel.
1. Remove all grease from crankshaft threads and tapered portion
of flywheel with solvent.
2. Check flywheel key is inserted in crankshaft.
7
3. Align flywheel keyway and install on crankshaft. Install the flywheel
washer.
4. Install puller (1) on flywheel using bolts (2). Hold puller
8
handle and torque flywheel nut to specification.
5.Install recoil starter or flywheel cover as required.
Model
40 / 50
60 / 70 / 80 / 90
115 / 120 / 140
4-22
WARNING
Flywheel Nut Torque
ft-lb
N·m
kg-m
65.1 - 79.5
88.2 - 107.8
9.0 - 11.0
101.2 - 115.7
137.2 - 156.8
14.0 - 16.0
181.0 - 195.0
245.0 - 264.6
25.0 - 27.0
T1198
T1199
3-/ 4-Cylinder