TOHATSU 40 Service Manual page 259

SECTION 7
6. Reconnect negative battery cable (3) to negative
7 8
battery terminal (1).
7. Connect RED tester lead to starter solenoid
7 8
terminal (5).
If meter does not indicate battery voltage, replace
7 8
battery cable (6).
If meter indicates battery voltage go to next step.
8. Disconnect lead (7) from starter solenoid (8) to
7 8
starter motor (9).
9. Connect RED tester lead to starter solenoid lead (7)
7 8
and turn main key switch (10) to START position.
If meter indicates battery voltage, repair or replace starter motor,
see Starter Motor Tests in this section.
If meter does not indicate battery voltage, go to next step.
7-80
T1514
3-/ 4-Cylinder