SECTION 5
Assembly
Before proceeding, make sure all components have
been thoroughly cleaned with solvent and allowed to
dry. Inspect all parts, especially bushings, thrust
washers, and upper and lower engine mounts for
damage and deterioration. Replace all seals and o-rings.
Improper arrangement of bushings and thrust
washers may not prevent full assembly of the bracket
components. Reference the preceding illustrations to
ensure correct orientation of all parts.
During assembly, apply genuine grease or equivalent
friction surface marine grease to all friction parts and
surfaces.
5-22
NOTE
NOTE
NOTE
T1308
3-/ 4-Cylinder