TOHATSU 40 Service Manual page 263

SECTION 7
For models with remote control box - Make sure you test the
11
correct terminal in this step. Terminal (14) is connected
directly to the main key switch (10) and the RED lead that
comes out of the large cable (15) that connects the engine
compartment (16) to the remote control box (17). DO NOT
CONFUSE TERMINAL (14) WITH TERMINAL (18).
For models without remote control box - You might have to
12
pull connector (15) apart and measure voltage at terminal
indicated in drawing.
7-84
NOTE
NOTE
T1514
3-/ 4-Cylinder