TOHATSU 40 Service Manual page 217

SECTION 7
5. Set the analog multimeter to "20" on the "DVA" scale.
6. Insert the banana plug of the RED tester lead into the meter
connection labeled "DVA" and the banana plug of the BLACK tester
lead into the meter connection labeled "-COM".
• Terminal 6.
• Terminal 8.
• Terminal 10.
• Terminal 12 (models 60B and 70B only).
8. Attach lanyard to emergency stop switch.
9. Crank engine.
10. See Ignition System Repair Procedures - Pulser Coil. After
repairs are made, return to Ignition System Performance Testing
Flow Chart.
7-38
T1481
3-/ 4-Cylinder