TOHATSU 40 Service Manual page 209

SECTION 7
Test 3 - Exciter Coil Test
Make sure all electrical terminals are connected
during this test except those that are noted in the
test procedure.
Check for continuity between chassis ground and
the ground connection for the magneto plate, CD
Unit, and ignition coils before conducting the
following procedure.
Reference the following electrical drawings for the
exciter coil test. The pulser and alternator coils have
been removed from both illustrations for clarity.
- Figure 1 - models 40 / 50 / 60C / 70C 80 / 90 / 115 / 120 /
7
140.
- Figure 2 - models 60B / 70B.
8
7-30
NOTE
T1479
3-/ 4-Cylinder