TOHATSU 40 Service Manual page 74

SECTION 3
Assembly
Components must be clean and all serviceable gaskets must be
replaced.
1. Assemble the intake manifold components as
5 6
illustrated:
• Apply Loctite 242 to threads of reed valve assembly screws (1).
• Install all gaskets dry.
• Torque manifold bolts (2) evenly to specification.
2. Connect the crankcase recirculation hose to the manifold (models
80, 90, 115, 120, and 140).
3. Install carburetors. See Carburetor, this section.
4. Connect the linkage at the throttle cam.
5. Install recoil starter or flywheel cover as applicable.
3-26
T1042 T1043
3-/ 4-Cylinder