TOHATSU 40 Service Manual page 276

Install Brush Assembly
1. Apply genuine grease to bearing cup (1).
39 40
2. For models 40 / 50 / 60 / 70 ONLY: Install bushing (1).
41
3. For models 40 / 50 / 60 / 70: Install brush assembly (1).
42
For models 80 / 90 / 115 / 120 / 140: Install brush assembly
43
(1). Make sure that the starter motor terminal (2) is fully
seated in the bushing (3).
4. For models 40 / 50 / 60 / 70 ONLY: Apply threadlocker to
44
screw threads and install screws (1).
3-/ 4-Cylinder
T1531
ELECTRICAL SYSTEM
T1532 T1528
T1527
T1530
T1526
7-97