TOHATSU 40 Service Manual page 179

SECTION 6
5. Insert rod (2) into gearcase so plate (1) is seated within
27
the bearing race.
6. Slide guide (5) onto rod and seat into position on
28
gearcase. Raised surface of guide must fit tightly within the
circumference of the gearcase opening.
7. Fully seat bearing race in gearcase by hammering the rod
29
end.
Bevel Gear A Roller Bearing
Removal and Installation
1. Insert screwdrivers in notches of bevel gear A and gently
30
pry gear and bearing apart.
2. Use specified set tool (1) to press fit bearing onto bevel
31
gear.
Tool
Set Tool, Bevel Gear A Bearing
Set Tool, Bevel Gear A Bearing
6-42
T1448
Part Number
3C8-72719-0
3B7-72224-0
T1449
Model
40 / 50 / 60B / 70B
60C / 70C / 80 / 90 / 115 / 120 / 140
T1450
T1451
T1452
3-/ 4-Cylinder