To Create A New File Or Folder - Rigol MSO4000 Series User Manual

RIGOL

To Create a New File or Folder

This operation is only valid in external storage. Before performing the operation,
make sure that a USB storage device is connected correctly.
Press Storage  Disk.Manage; turn the multi-function knob
1.
external disk ("Disk D" or "Disk E") and press the knob to open the disk.
2. Turn the multi-function knob
create a new file or folder. The default is the root directory of the USB storage
device (D:\). The current directory is displayed at the upper-left corner of the
disk management interface.
Press File Type to select the desired file type and press New File or directly
3.
press New Folder to open the filename input interface as shown in the figure
below.
This oscilloscope supports Chinese/English input method. The filename or folder
name can contain letters, numbers, underscores, spaces and Chinese characters and
the length of the characters is limited to 31 bytes (one Chinese character occupies
two bytes). Please input the desired name to create a new file or folder by referring
to "English Input Method" and "Chinese Input Method"
Tip
During the name input, use the menu softkeys to select different operation areas,
then turn the multi-function knob
down the knob to input the content selected.
13-12
800.544.2843
to select the desired directory under which to
to select the desired content and press
www.calcert.com
15
10 20
5 25
0 30
Chapter 13 Store and Recall
to select the
MSO4000/DS4000 User's Guide
sales@calcert.co