Rigol MSO4000 Series User Manual page 255

Chapter 8 Protocol Decoding
6. Specify the bits
7. Specify the transmission endian
8. Specify the display format
9. Adjust the vertical offset
10. View the event table
MSO4000/DS4000 User's Guide
800.544.2843
no corresponding data channel is specified.
Press Data Bits and turn the multi-function knob
bits. The range available is from 4 to 32 and the default is 8.
Press Endian to select "LSB" or "MSB" and the default is "MSB".
LSB: Least Significant Bit; namely the less significant bit of the data will be

transmitted first.
MSB: Most Significant Bit; namely the more significant bit of the data will be

transmitted first.
LSB
Press Format and turn the multi-function knob
the bus data to Hex, Decimal, Binary or ASCII. You can also press Format
continuously to switch the current display format.
Note: When the event table is turned on, the decoding data in the event table
will also be displayed in the format selected here.
Press Offset and turn the multi-function knob
of the bus. Pressing the knob can quickly reset the vertical offset (zero).
The event table displays the detailed information of the decoding in table form
to view relatively longer decoded data.
Note: You can only view the event table and export the decoded data when the
display of the corresponding bus is turned on.
www.calcert.com
15
10 20
5 25
0 30
to select the desired data
MSB
to set the display format of
to adjust the vertical position
sales@calcert.co
RIGOL
8-23