To Specify The Waveform Display Size - Rigol MSO4000 Series User Manual

Chapter 7 Logic Analyzer
2. Set the digital channels included in Group1
3. Cancel the grouping setting of the digital channel or user-defined

To Specify the Waveform Display Size

You can set the display size of the digital channel waveforms on the screen. The sizes
available are small, medium and large.
Press LA  WaveSize; turn the multi-function knob
display size and press the knob. You can also press WaveSize continuously to
switch he current display size. The sizes available are S (small), M (medium) and L
(large).
MSO4000/DS4000 User's Guide
800.544.2843
Add digital channels

Turn the multi-function knob
); press the knob or press Group1. At this point, the selecting
label is
state label of the channel changes to
Group1).
Delete digital channels

Turn the multi-function knob
); press the knob or press Group1. At this point, the selecting
label is
state label of the channel changes to
from Group1).
Note: You can add or delete digital channels repeatedly.
channel group
Press UnGroup to open the channel/group list; turn the multi-function knob
to select the desired digital channel or group and press this knob or UnGroup to
cancel the grouping setting of the digital channel or the channel group.
Note: The ungrouping operation can only be performed on digital channels or
user-defined channel groups that have been grouped. If no grouping setting is
performed, UnGroup is grayed out and disabled.
www.calcert.com
15
10 20
5 25
0 30
to select any channel (the selecting state
(denote the channel is assigned to
to select any channel (the selecting state
(denote the channel is removed
to select the desired
RIGOL
7-5
sales@calcert.co