Rigol MSO4000 Series User Manual page 319

Chapter 13 Store and Recall
2. Load the specified type of file in the external USB storage device (take
MSO4000/DS4000 User's Guide
800.544.2843
same directory with the same filename as the picture file.
Press Inverted to enable or disable the invert function.
c.
Press Color to set the color of the image to "GrayScale" or "Color".
d.
e. Press Header to enable or disable the header display. When it is enabled,
the header would display the instrument information, such as the model,
date and time.
f. Press Footer to enable or disable the footer display. When it is enabled, the
footer would display the serial number of the instrument.
trace storage as an example)
1) Press Storage  Storage; turn the multi-function knob
"Traces" and press the knob. You can also press Storage continuously to
switch to "Traces".
2) Press Load to turn on the disk management interface. Turn the
multi-function knob
press down the knob to open the external disk recall interface.
3) Turn the multi-function knob
becomes available and press the softkey to load the file selected.
www.calcert.com
15
10 20
5 25
0 30
to select "Disk D" (the characters turn green) and
to select the file to be loaded; Load
RIGOL
to select
13-9
sales@calcert.co