To Create A New File Or Folder - Rigol MSO1000Z series User Manual

Chapter 14 Store and Recall

To Create a New File or Folder

This operation is only valid in external storage. Before using external disk, make sure
that a USB storage device is connected correctly.
First, press Storage  DiskManage and use
disk ("Disk D"). Then, select the desired file type and select the desired directory
under which to create a new file or folder. The default is the root directory of the USB
storage device.
Press New File or New Folder to turn on the interface as shown in the figure
below.
This oscilloscope supports Chinese/English input method. The file name or folder
name can contain letters, numbers, underscores, spaces and Chinese characters and
the length of the characters is limited to 64 bytes. The following part introduces how
to input a file name or folder name using Chinese/English input method.
Operation Tip
During the name input, use the menu softkeys to select different operation areas,
then turn to select the desired content and press down
content selected.
MSO1000Z/DS1000Z User's Guide
Figure 14-2 To Create a New File or Folder
to select and open the external
to input the
RIGOL
14-7