Chapter 14 System Function Setting
Self-test Information
Press Utility System SelfTestInfo to enter the self-test information interface.
You can view the result of the last self-test of the oscilloscope. The self-test
information contains the system voltage and outlet temperature.
Screen Saver
When the oscilloscope enters the idle state and holds for a certain period of time, the
screen saver program will be enabled.
Press Utility System Screen to open the screen saver setting menu. In this
menu,
Screensaver is "Default"; namely the icon RIGOL is used as the screen saver icon.
Press Time and turn the multi-function knob
time (the default is "OFF"). You can also press Time continuously to switch the
current screen saver time. The screen saver time can be set to 1 min, 2 min, 5 min,
15 min, 30 min, 45 min, 60 min, 2 hour or 5 hour. When "OFF" is selected, the screen
saver program is disabled.
MSO4000/DS4000 User's Guide
800.544.2843
www.calcert.com
15
10
20
5
25
0
30
to select the desired screen saver
sales@calcert.co
RIGOL
14-11