Rigol MSO4000 Series User Manual page 294

RIGOL
2) Pause the playback operation
During the playback process (the backlight of the playback/pause shortcut
key (
and turn the multi-function knob
directly press the playback/pause shortcut key (
oscilloscope pauses the playback operation. At this point, the backlight of
the playback/pause shortcut key (
constant on.
When the playback operation is paused, you can adjust the Current Frame
according to your need (refer to "Manual Playback"); when the playback
operation is resumed, the oscilloscope will play back from the frame
specified in Current Frame.
Tip
When the "Play back" mode is enabled, RUN/STOP can be used to switch
between playback and pause.
3) Stop the playback operation


11-10
800.544.2843
) is illuminated in yellow and flashes continuously), press Operate
When the single playback (
Stop manually
During the playback process, press Operate to select "■" or press the
stop shortcut key (
playback.
Stop automatically
The oscilloscope will stop the playback automatically after the specified
number of frames (from Start Frame to End Frame) of waveform are
played back.
When the circular playback (
You can only stop the playback manually.
During the playback process, press Operate and select "■" or press
the stop shortcut key (
playback.
www.calcert.com
15
10 20
5 25
0 30
Chapter 11 Waveform Recording
to select " " and press the knob or
) is illuminated in yellow and is
) mode is selected,
) at the front panel; the oscilloscope stops the
) mode is selected,
) at the front panel; the oscilloscope stops the
) at the front panel; the
MSO4000/DS4000 User's Guide
sales@calcert.co