To Adjust The Horizontal Time Base - Rigol MSO4000 Series User Manual

RIGOL

To Adjust the Horizontal Time Base

The horizontal time base (also called horizontal scale) refers to the time value per
grid in the horizontal direction on the screen and is usually expressed as s/div. The
adjustable range of the horizontal time base is related to the instrument model, as
shown in the table below.
Table 3-1 Horizontal Time Base Range
Model
MSO405X/DS405X
MSO403X/DS403X
MSO402X/DS402X
MSO401X/DS401X
Press MENU in the horizontal control area (HORIZONTAL) at the front panel and
press ScaleAdjust to switch the horizontal time base adjustment mode to "Coarse"
or "Fine" (the default is coarse).
When "Coarse" is selected, turning HORIZONTAL

horizontal time base within the adjustable range at 1-2-5 step sequence. Turn
the knob clockwise to reduce the horizontal time base and counterclockwise to
increase the horizontal time base.
When "Fine" is selected, turning HORIZONTAL

the horizontal time base within the adjustable range at a smaller step. Turn the
knob clockwise to reduce the horizontal time base and counterclockwise to
increase the horizontal time base.
When modifying the horizontal time base, the waveform displayed will be expanded
or compressed horizontally relative to the horizontal reference currently selected
(refer to "To Specify the Horizontal Reference"); the time base information (as
shown in the figure below) at the upper-left side of the screen will change
accordingly.
Note: When delayed sweep is turned on, HORIZONTAL
adjust the delayed sweep time base; the delayed sweep time base information (as
shown in the figure below) at the middle of the screen changes accordingly.
3-2
800.544.2843
Horizontal Time Base Range
1.000 ns/div to 1.000 ks/div
2.000 ns/div to 1.000 ks/div
2.000 ns/div to 1.000 ks/div
5.000 ns/div to 1.000 ks/div
www.calcert.com
15
10 20
5 25
0 30
Chapter 3 Horizontal System Setting
SCALE will adjust the
SCALE will further adjust
SCALE is used to
MSO4000/DS4000 User's Guide
sales@calcert.co