Rigol MSO4000 Series User Manual page 237

Chapter 8 Protocol Decoding
7. View the event table
Event Table
Parallel Bus
MSO4000/DS4000 User's Guide
800.544.2843
of the bus. Pressing the knob can quickly reset the vertical offset (zero).
The event table displays the detailed information of the decoding in table form
to view relatively longer decoded data.
Note: You can only view the event table and export the decoded data when the
display of the corresponding bus is turned on.
When BusStatus is set to "ON", press Event Table to enter the event table
submenu. In this submenu, you can perform the following operations.
Press Event Table to turn on or off the event table. When the event table
1)
is turned on, the interface is as shown in Figure 8-2.
Line Number Time
The event table displays the detailed decoding information (include the
decoded data as well as the corresponding line number and time) of the
waveform on the screen in time order. At most 10 lines of decoding
information can be displayed on one page (the line number starts from 0).
You can turn the multi-function knob
view the corresponding decoding information. The line currently selected is
highlighted with brown shading and the decoded data of this line is
dispalyed at the lower-left side of the event table.
www.calcert.com
15
10 20
5 25
0 30
Decoded Data
Figure 8-2 Parallel Decoding
to select the specified line and
sales@calcert.co
RIGOL
8-5