Rigol MSO4000 Series User Manual page 267

Chapter 8 Protocol Decoding
2)
11. Explanation of the decoded FlexRay frame data
MSO4000/DS4000 User's Guide
800.544.2843
horizontal time base. You can view the detailed information by reducing
the horizontal time base.
If a USB storage device is currently connected to the instrument, you can
press Export to export the decoded data list to the external USB storage
device in CSV format.
TSS: transmission start sequence; expressed by light purple patch.

Frame Type: FlexRay frame type; expressed by purple patch. It can be

NORMAL, SYNC, SUP or NULL.
Frame ID: displayed as hexadecimal number and expressed by blue patch.

PL (Payload Length): displayed as hexadecimal number and expressed by

brown patch.
Header CRC (Header Cyclic Redundancy Check): displayed as hexadecimal

number and expressed by turquoise patch. When CRC is invalid, it is
expressed by red patch.
CYC (Number of Cycles): displayed as hexadecimal number and expressed

by pink patch.
Data: displayed in the format (Hex, Decimal, Binary or ASCII) specified in

"Format" and expressed by a green patch.
Tail CRC (Tail Cyclic Redundancy Check): displayed as hexadecimal number

and expressed by turquoise patch. When CRC is invalid, it is expressed by a
red patch.
DTS: dynamic tail sequence; expressed by a light purple patch.

TSS Frame Type
Data
www.calcert.com
15
10 20
5 25
0 30
Frame ID PL Header CRC
Tail CRC
RIGOL
CYC
DTS
8-35
sales@calcert.co