Rigol MSO4000 Series User Manual page 316

RIGOL
Note:


Tip
You can press REF  Export to enter the disk management interface of reference
waveform file storage. Press Utility  Pass/Fail  Save to enter the disk
management interface of pass/fail test mask file storage.
2. Load the setup file in internal memory
1) Press Storage  Storage; turn the multi-function knob
"Setups" and press the knob. You can also press Storage continuously to
switch to "Setups".
2) Press Load to open the disk management interface. Turn the multi-function
knob
the knob to open the local disk recall interface.
3) Turn the multi-function knob
becomes available and press the softkey to load the file selected.
Tip
You can press REF  Import to enter the disk management interface of
reference waveform file recall. Press Utility  Pass/Fail  Load to enter the
disk management interface of pass/fail test mask file recall.
13-6
800.544.2843
Turn the multi-function knob
the knob to return to the previous directory.
In internal storage, New File and New Folder are not available.
to select "Local Disk" (the characters turn green) and press down
www.calcert.com
15
10 20
5 25
0 30
Chapter 13 Store and Recall
to select
to select the file to be loaded; Load
MSO4000/DS4000 User's Guide
and then press down
to select
sales@calcert.co