Function Keys - Rigol MSO4000 Series User Manual

RIGOL

Function Keys

Measure: press this key to enter the measurement setting menu. You can set

the signal source, perform all measurement, turn on the statistic function, make
measurement settings and so on.
Acquire: press this key to enter the sample setting menu. You can set the

acquisition mode, memory depth and anti-aliasing function of the oscilloscope.
Storage: press this key to enter the file store and recall interface. This

instrument supports internal/external storage as well as disk management.
Cursor: press this key to enter the cursor measurement menu. The oscilloscope

provides four cursor modes (manual, track, auto and X-Y).
Note: The X-Y cursor mode is only available when the horizontal time base
mode is X-Y.
Display: press this key to enter the display setting menu. You can set the

waveform display type, persistence time, waveform intensity, screen grid type,
grid brightness and menu display time.
Utility: press this key to enter the system auxiliary function setting menu. You

can set the system-related functions and parameters, such as the I/O setting,
sound and language. The oscilloscope also supports some advanced functions,
such as the pass/fail test and print setting.
Record: press this key to enter the waveform recording menu. You can select

the desired waveform recording mode and set the related parameters.
Help: press this key to open the help interface. For the detailed information,

please refer to the introduction in "To Use the Built-in Help System".
1-26
800.544.2843 www.calcert.com
15
10 20
5 25
0 30
Chapter 1 Quick Start
MSO4000/DS4000 User's Guide
sales@calcert.co