12 Store and Recall
To Create a New File or Folder
This operation is only valid in external storage. Before using external store and recall,
make sure that a USB storage device is connected correctly.
First, press SAVE Disk Manage and use
("Disk D" or "Disk E").
Second, select the desired directory under which to create a new file or folder. The
default is the root directory of the USB storage device.
Then, press New File or New Folder to turn on the interface as shown in the figure
below.
This oscilloscope supports Chinese/English input method. The file name or folder
name contains letters, numbers, underscores, spaces and Chinese characters and
the length of the characters is limited to 64 bytes. The following part introduces how
to input a file name or folder name using Chinese/English input method.
Operation Tip
During the name input, use the menu softkeys to select different operation areas,
then turn
to select the desired content and press down
selected.
DS6000 User's Guide
to select and open the external disk
to input the content
RIGOL
12-11