Rigol MSO4000 Series User Manual page 351

Chapter 14 System Function Setting
4. Set the picture type
5. Set the print quality
6. Enable or disable the date print
7. Set the print copies
8. Enable or disable print color invert
9. Start the print
10. Stop the print
MSO4000/DS4000 User's Guide
800.544.2843
Press File Type and turn the multi-function knob
picture type. You can also press this key continuously to switch the current
picture type. The picture types include "Default", "Exif/Jpeg" and "Bmp".
Note: The picture types available are related to the property of the printer
connected. Picture types not supported by the printer cannot be selected.
Press Print Quality and turn the multi-function knob
print quality. You can also press this key continuously to switch the current print
quality. The print qualities include "Default", "Normal", "Draft" and "Fine".
Note: The print qualities available are related to the property of the printer
connected. Print qualities not supported by the printer cannot be selected.
Press Date Print to select "ON" or "OFF" and the default is "OFF".
Note: The date print is determined by the property of the printer connected. It
cannot be printed if the printer does not support this function.
Press Copies and turn the multi-function knob
of copies. The range is from 1 to 999.
Press Invert to select "ON" or "OFF" and the default is "OFF".
After setting the print parameters according to the methods above, press Print
or press the shortcut key
the print operation according to the current print parameter settings.
During the print process, pressing Abort will stop the current print.
Note: This softkey is only available during the print process.
www.calcert.com
15
10 20
5 25
0 30
to select the desired number
at the front panel and the printer will execute
RIGOL
to select the desired
to select the desired
14-15
sales@calcert.co