Rigol MSO4000 Series User Manual page 326

RIGOL
3. Input the first Chinese character "文"
1) Input the pinyin "wen" in the "Pinyin Input Area"
Press Keyboard to select the "Keyboard" area, turn the multi-function
knob
the knob to input "w" in the "Pinyin Input Area".
Use the same method to input the remaining letters "en" in the pinyin "wen".
After finishing the input, the Chinese characters available are displayed in
the "Chinese Character Selecting Area".
2) Select the desired Chinese character in the "Chinese Character Selecting
Area"
Press Chinese to select the "Chinese Character Selecting Area", turn the
multi-function knob
the "Name Input Area".
4. Input the other chracters
Use the same method to input the remaining Chinese characters "件名" by
referring to step 3.
5. Modify or delete the chracters input
When inputting the name, you can modify or delete the filename characters
input in the "Name Input Area" as well as delete the pinyin characters input in
the "Pinyin Input Area".
1) Modify or delete the filename characters input in the "Name Input Area"
Press Name to select the "Name Input Area" and turn the multi-function
knob
desired character by referring to step 3 or press Delete to delete the
character.
2) Delete the pinyin characters input in the "Pinyin Input Area"
Press Keyboard to select the "Keyboard" area and press Delete
continuously to delete the pinyin characters input in the "Pinyin Input Area"
in order.
6. After finishing the input, press OK and the oscilloscope will create a folder or a
specified type of file with this name under the current directory.
13-16
800.544.2843
to select the first letter "w" (or "W") in the pinyin "wen" and press
to select "文" and press the knob to input "文" in
to select the character to be modified or deleted; input the
www.calcert.com
15
10 20
5 25
0 30
Chapter 13 Store and Recall
MSO4000/DS4000 User's Guide
sales@calcert.co