Chapter 11 Waveform Recording - Rigol MSO4000 Series User Manual

Chapter 11 Waveform Recording

Chapter 11 Waveform Recording
The waveform recording function provides various recording modes (Record 
Mode).
Record: record the channel waveforms at the specified interval until users stop the
recording operation manually or when the number of frames recorded reaches the
end frame currently set.
Open: record the channel waveform in real-time until users press RUN/STOP.
Playback: play back the waveform currently recorded.
Analyze: analyze the waveform currently recorded and provide the analysis results.
Note:
1. The waveform recording function is only available when the horizontal time base
mode is "Y-T".
2. The digital channels (D0 to D15) only support waveform recording and playback
and do not support waveform analysis.
The contents of this chapter:




MSO4000/DS4000 User's Guide
800.544.2843
To Record Waveform Using the "Record" Mode
To Record Waveform Using the "Open" Mode
To Play Back the Waveform Recorded
To Analyze the Recorded Waveform
www.calcert.com
15
10 20
5 25
0 30
RIGOL
11-1
sales@calcert.co