To Adjust The Reference Waveform Display; To Export The Reference Waveform File - Rigol MSO4000 Series User Manual

Chapter 9 Reference Waveform

To Adjust the Reference Waveform Display

1.
2.
3.
Note: Pressing Reset will immediately restore the vertical position and vertical scale
of the reference waveform to the source channel settings when the "Save" operation
was executed.

To Export the Reference Waveform File

Users can save the current reference waveform to the internal memory or external
USB storage device (only when a USB storage device is detected) in "*.ref" format.
At most 10 reference waveform files (LocalREF0.ref to LocalREF9.ref) can be saved
in the internal memory.
1.
2.
MSO4000/DS4000 User's Guide
800.544.2843
Display the reference waveform on the screen by referring to "To Save and
Display the Reference Waveform".
Press and turn the multi-function knob
the reference waveform.
Press and turn the multi-function knob
the reference waveform.
Display the reference waveform on the screen and adjust the vertical position
and vertical scale of the reference waveform by referring to "To Save and
Display the Reference Waveform" and "To Adjust the Reference
Waveform Display".
Press Export to enter the file store interface. Please refer to the relative
descriptions in "Store and Recall" to save the reference waveform to internal
or external memory.
www.calcert.com
15
10 20
5 25
0 30
to adjust the vertical position of
to adjust the vertical scale of
sales@calcert.co
RIGOL
9-5