Rigol MSO4000 Series User Manual page 64

RIGOL
14. CH4 Status Label
Display the on/off status of CH4. When it is on, the status label is

highlighted.
Display the vertical scale of CH4 (namely the voltage value per grid of the

CH4 waveform in the vertical direction). You can use VIRTICAL
under CH4 to modify this parameter.
Different labels may be displayed according to the current channel setting.

For example,
Specify the Channel Coupling") is AC;
bandwidth limit (refer to "To Specify the Bandwidth Limit") is enabled;
Impedance") is 50 Ω.
15. Message Box
Display the prompt messages.
16. Digital Channel Status Area
Display the current on/off statuses of the 16 digital channels (D15 to D0 from
left to right). The active digital channel is highlighted in red and the other digital
channels currently turned on are displayed in green. The digital channels turned
off are displayed in gray.
Note: This function is only applicable to MSO4000 series oscilloscope.
17. Notification Area
Display the system time, sound icon, USB storage device icon and PictBridge
printer icon.
System Time: displayed in "hh:mm (hour:minute)" format. When printing

or storing the waveform, the output file will contain this time information.
Press Utility  System  System Time  System Time to set the
system time in the following format.
yyyy-mm-dd hh:mm:ss (year-month-date
Sound Icon: when beeper is turned on,

Sound to turn the beeper on or off.
USB Storage Device Icon: when the oscilloscope detects a USB storage

device,
PictBridge Printer Icon: when the oscilloscope is correctly connected to a

1-34
800.544.2843
is displayed when the channel coupling (refer to "To
is displayed when the input impedance (refer to "To Specify the Input
is displayed.
www.calcert.com
15
10 20
5 25
0 30
Chapter 1 Quick Start
is displayed when the
hour:minute:second)
is displayed. Press Utility 
MSO4000/DS4000 User's Guide
sales@calcert.co
SCALE