To Create A New File Or Folder - Rigol DS1000Z-E Series User Manual

RIGOL

To Create a New File or Folder

This operation is only valid in external storage. Before using external disk, make sure
that a USB storage device (FAT32 format, flash memory) is connected correctly.
First, press Storage  DiskManage and use
disk ("Disk D"). Then, select the desired directory under which you need to create a
new file or folder. The default is the root directory of the USB storage device. Finally,
select the desired file type and press New File or press New Folder directly to turn
on the interface as shown in the figure below.
This oscilloscope supports Chinese/English input method. The file name or folder
name can contain letters, numbers, underscores, spaces and Chinese characters and
the length of the characters is limited to 31 bytes. The following part introduces how
to input a file name or folder name using Chinese/English input method.
Operation Tip
During the name input, use the menu softkeys to select different operation areas,
then turn
content selected.
12-8
Find Quality Products Online at:
Figure 12-2 To Create a New File or Folder
to select the desired content and press down
GlobalTestSupply
www.
Chapter 12 Store and Recall
to select and open the external
to input the
DS1000Z-E User Guide
.com
sales@GlobalTestSupply.com