Rigol MSO4000 Series User Manual page 61

Chapter 1 Quick Start
2. Analog Channel Label and Waveform
3. Digital Channel Label and Waveform
4. Status
5. Horizontal Time Base
6. Sample Rate and Memory Depth
7. Waveform Memory
8. Trigger Position
MSO4000/DS4000 User's Guide
800.544.2843
Different channels are marked in different colors. The channel label and
waveform are marked in the same color as the analog channel.
The logic high levels of the digital channel waveforms are displayed in blue; the
logic low levels are displayed in green which complies with the color of the
digital channel label and the edges are displayed in white. The label and
waveform of the digital channel currently selected are both displayed in red.
Note: Only applicable to MSO4000 series oscilloscope.
Available statuses include RUN, STOP, T'D (triggered), WAIT and AUTO.
Represent the time per grid on the horizontal axis on the screen.

Use HORIZONTAL

models, the adjustable ranges of the horizontal time base are different
(please refer to Table 3-1).
Display the current sample rate and memory depth of the analog channels.

Modifying the horizontal time base (use HORIZONTAL

modify the sample rate and/or memory depth indirectly. You are not
allowed to modify the sampler rate directly.
Provide the schematic diagram of the memory position of the waveform
currently on the screen in the memory.
Waveform in the Memory
Waveform on the Screen
Display the trigger positions of the waveform in the waveform memory and on
www.calcert.com
15
10 20
5 25
0 30
SCALE to modify this parameter. For different
RIGOL
SCALE) might
1-31
sales@calcert.co