Chapter 12 Display Control
To Set the Waveform Brightness
Press Display WaveIntensity and turn the multi-function knob
the display brightness of the waveform . The range available is from 0% to 100%.
The default is 50%.
In addition, when the operation menu at the right side of the screen are hidden, you
can turn the multi-function knob
analog channels. The current waveform brightness information is displayed at the
lower-right side of the screen.
To Specify the Screen Grid Type
Press Display Grid and turn the multi-function knob
grid type and press the knob. You can also press Grid continuously to switch the
current grid type.
To Set the Grid Brightness
Press Display Brightness and turn the multi-function knob
display brightness of the grid. The range available is from 0% to 100%. The default
is 50%.
MSO4000/DS4000 User's Guide
800.544.2843
: turn the background grid and coordinate on.
: turn the background grid off and turn the coordinate on.
: turn the background grid and coordinate off.
www.calcert.com
15
10
20
5
25
0
30
to adjust the waveform brightness of the
RIGOL
to adjust
to select the desired
to adjust the
12-5
sales@calcert.co