To Set The Digital Channel Label - Rigol MSO4000 Series User Manual

RIGOL

To Set the Digital Channel Label

By default, the instrument uses D0 to D15 as the channel labels of the 16 digital
channels. To identify different channels conveniently, you can define a label for each
digital channel. You can use the preset label or input the label manually.
Press LA  Label to enter the label setting submenu.
1. Select the specified digital channel
Press Sel CH and turn the multi-function knob
channel. You can also press Sel CH continuously to switch the current digital
channel. You can select any channel from D0 to D15.
2. Set the user-defined label
Use the preset label

Press Preset; turn the multi-function knob
and press the knob. You can also press Preset continuously to switch the
current preset label. The preset labels available include ACK, AD0, ADDR,
BIT, CAS, CLK, DATA, HALT, INT, UB, LOAD, NMI, OUT, PIN, RAS, RDY, RST,
RX, TX and WR.
Input a label manually

Press Input to open the label submenu and the label modification interface.
Please set the digital channel label by referring to the instruction in "To Set
the Channel Label".
Note: The user-defined label can include uppercase English letters (from A
to Z), lowercase English letters (from a to z), numbers (from 0 to 9),
underline (_) and space; the length of the label cannot exceed 4 characters.
7-10
800.544.2843 www.calcert.com
15
10 20
5 25
0 30
Chapter 7 Logic Analyzer
to select the desired digital
to select the desired label
MSO4000/DS4000 User's Guide
sales@calcert.co