To Create A New File Or Folder - Rigol 2000 Series User Manual

Digital oscilloscope
Hide thumbs Also See for 2000 Series:
Table of Contents

Advertisement

RIGOL

To Create a New File or Folder

This operation is only valid in external storage. Before using external disk, make sure
that the USB storage device is connected correctly.
First, press Storage  Disk.Manage and use
disk ("Disk D"). Then, select the desired directory under which to create a new file or
folder. The default is the root directory of the USB storage device. Lastly, press File
Type
select the desired file type and press New File or directly press New
to
Folder to turn on the interface as shown in the figure below.
This oscilloscope supports Chinese/English input method. The file name or folder
name can contain letters, numbers, underscores, spaces and Chinese characters and
the length of the characters is limited to 31 bytes. The following part introduces how
to input a file name or folder name using Chinese/English input method.
Operation Tip
During the name input, use the menu softkeys to select different operation areas,
then turn
to select the desired content and press down
content selected.
14-10
Figure 14-7 To Create a New File or Folder
Chapter 14 Store and Recall
to select and open the external
to input the
MSO2000A/DS2000A User Guide

Advertisement

Table of Contents
loading

Table of Contents