RIGOL
To Create a New File or Folder
This operation is only valid in external storage. Before using external store and recall,
make sure that a USB flash device is connected correctly.
First, press SAVE Disk Manage and use
disk ("Disk D" or "Disk E").
Second, select the desired directory under which to create a new file or folder. The
default is the root directory of the USB flash device.
Next, press New to turn on the interface as shown in the figure below. Press Type
to select "New File" or "New Folder".
This oscilloscope supports Chinese/English input method. The file name or folder
name contain letters, numbers, underscores, spaces and Chinese characters and the
length of the characters is limited to 64 bytes. The following part introduces how to
input a file name or folder name using Chinese/English input method.
Operation Tip
During the name input, use the menu softkeys to select different operation areas,
then turn
to select the desired content and press
selected.
12-12
to select and turn on the external
to input the content
DS6000 User's Guide