To Adjust The Vertical Position - Rigol MSO4000 Series User Manual

RIGOL

To Adjust the Vertical Position

The vertical position refers to the position of the ground level of the waveform
relative to the screen center in the vertical direction. The adjustable range of the
vertical position is related to the current input impedance, probe ratio and vertical
scale (refer to "Specifications"). The unit is the same as the amplitude unit
currently selected (refer to "To Specify the Amplitude Unit").
Press CH1 and its backlight is illuminated; then, turn VERTICAL
corresponding to CH1 to adjust the vertical position of the channel waveform within
the adjustable range.
Turn the knob clockwise to increase the vertical position and counterclockwise to

reduce the vertical position.
Press this knob to quickly reset the vertical position to 0.

When modifying the vertical position, the waveform of the corresponding channel
moves up and down; the vertical position information (as shown in the figure below)
pops up at the lower-left side of the screen in real-time.
2-4
800.544.2843 www.calcert.com
15
10 20
5 25
0 30
Chapter 2 Vertical System Setting
POSITION
MSO4000/DS4000 User's Guide
sales@calcert.co