Rigol MSO4000 Series User Manual page 60

RIGOL
Table 1-2 User Interface Overview
No. Name
1 Auto Measurement Items
2 Analog Channel Label and
Waveform
3 Digital Channel Label and
Waveform
4 Status
5 Horizontal Time Base
6 Sample Rate and Memory Depth
7 Waveform Memory
8 Trigger Position
9 Horizontal Position
Tip:
Table 1-2 is the user interface overview table. You can click the number or name to
quickly move to the corresponding content.
In the following part, detailed introductions are provided on the user interface
accoding to the numbering sequence in Figure 1-14.
1. Auto Measurement Items
Provide 16 horizontal (HORIZONTAL) and 13 vertical (VERTICAL) measurement
parameters.
Pressing MENU at the left of the screen can unfold the horizontal measurement
menu or the vertical measurement menu or fold the measurement menu. When
the measurement menu is unfolded, pressing the measurement menu softkey at
the left of the screen can activate the auto measurement function of the
corresponding parameter.
Note: When the measurement menu is unfolded, the following labels may be
displayed in the grid at the lower-left side of the screen.
1-30
800.544.2843
Denote that the current menu includes multiple pages. You can press
(the page down key) at the left of the screen to open the next page
of menu.
Denote that the current menu includes multiple pages. You can press
(the page up key) at the left of the screen to open the previous page
of menu.
www.calcert.com
15
10 20
5 25
0 30
Chapter 1 Quick Start
No. Name
10 Trigger Setting
11 CH1 Status Label
12 CH2 Status Label
13 CH3 Status Label
14 CH4 Status Label
15 Message Box
16 Digital Channel Status Area
17 Notification Area
18 Function Setting Menu
MSO4000/DS4000 User's Guide
sales@calcert.co