Rigol MSO4000 Series User Manual page 368

RIGOL
Note: If you want to remove the unwanted resource, click the resource name to
select it and click
If resources cannot be found automatically:
Select the GPIB card address of the PC from the dropdown box of "GPIB0::"

and select the GPIB address set in the oscilloscope from the dropdown box
of "0::INSTR".
Click

normally. If not, please follow the corresponding prompt messages to solve
the problem.
5. View device resource
The GPIB resources found will appear under the "RIGOL Online Resource"
directory, as shown in the figure below.
15-10
800.544.2843
(b)
.
to check whether the GPIB communication works
www.calcert.com
15
10 20
5 25
0 30
Chapter 15 Remote Control
MSO4000/DS4000 User's Guide
sales@calcert.co