Danfoss VLT Flow Drive FC 111 Programming Manual page 162

VLT® Flow Drive FC 111
Programming Guide
20-69 Sensorless Information
Default value: 0
Conversion index: 0
View information about the sensorless data.
Table 367: Range:
Min: 0
4.15.4 20-7* PI Autotuning
Parameters for enabling PI auto-tuning.
20-70 Closed Loop Type
Default value: [0] Auto
Conversion index: -
Select the expected application response.
Table 368: Option:
[0] Auto
[1] Fast pressure
[2] Slow pressure
[3] Fast temperature
[4] Slow temperature
20-71 PI Performance
Default value: [0] Normal
Conversion index: -
Select the relative response speed for the application.
Table 369: Option:
[0]
[1]
20-72 PI Output Change
Default value: 0.10
Conversion index: -2
Set the magnitude of step change during the auto-tuning sequence.
Table 370: Range:
Min: 0.01
20-73 Minimum Feedback Level
Default value: -4999.000 ProcessCtrlUnit
Conversion index: -3
162 | Danfoss A/S © 2021.07
Parameter type: Range
Data type: VisibleString
Max: 25
Parameter type: Option
Data type: u_int8
Parameter type: Option
Data type: u_int8
Normal
Fast
Parameter type: Range
Data type: u_int16
Max: 0.50
Parameter type: Range
Data type: int32
2-setup: 1 setup
Change during operation: True
Default value: 0
2-setup: 1 setup
Change during operation: True
2-setup: 1 setup
Change during operation: True
2-setup: 1 setup
Change during operation: True
Default value: 0.10
2-setup: 1 setup
Change during operation: True
AU363928304090en-000101 / 130R0982
Parameters